Reasonable use of gas springs?

Gas springs are used on some piston rods. There are also skills in the use of gas springs. For the use of gas springs, how are the skills, and what are the reasonable skills, we will give you a brief introduction below.

In order to ensure the reliability of the seal, the gas spring must not damage the surface of the piston rod, and it is strictly forbidden to apply paint and chemical substances on the piston rod. It is also not allowed to install the gas spring in the desired position before spraying and painting. Remember that the piston rod must never be rotated to the left.

If you need to adjust the direction of the connector, you can only turn it to the right. This can also be rotated to a fixed orientation. The size of the gas spring should be reasonable, the size of the gas spring force should be appropriate, and the stroke size of the piston rod should be spaced, so that it cannot be locked, so that future maintenance will be a problem.

In order to ensure the reliability of the seal, the gas spring must not damage the surface of the piston rod, and it is strictly forbidden to apply paint and chemical substances on the piston rod. It is also not allowed to install the gas spring in the desired position before spraying and painting. Remember that the piston rod must never be rotated to the left. If you need to adjust the direction of the connector, you can only turn it to the right. This can also be rotated to a fixed orientation. The size of the gas spring should be reasonable, the size of the gas spring force should be appropriate, and the stroke size of the piston rod should be spaced, so that it cannot be locked, so that future maintenance will be a problem.

For the use of gas springs, mastering certain skills will help to play the role of gas springs. According to the position where the gas springs are used, the use skills should also be constantly changed. This needs to be controlled by yourself.

Leave a Reply

Your email address will not be published.