Mazda 6 Boot Strut

What is a Mazda 6 Boot Strut?

A Mazda 6 boot strut is a gas-filled lift support used on the rear hatch of selected Mazda 6 hatchback models. It helps the boot lid open smoothly, stay raised safely, and close with better control.

Gastac supplies mazda 6 boot gas struts compatible with OEM numbers sg227008 and 8185181a02. Buyers can use these OEM numbers to confirm replacement fitment, compare specifications, and source suitable parts for repair, wholesale, or automotive parts supply.

What are signs of failing boot struts?

Weak boot struts usually show clear symptoms before they completely fail. If these problems appear, the original struts may no longer provide enough gas pressure or stable support.

• The boot lid drops down or cannot stay open.
• The rear hatch feels heavy when lifting.
• The boot opens slowly or unevenly.
• The lid suddenly falls in cold weather.
• Oil leakage or weak rebound appears near the strut body.

As a professional gas spring manufacturer, Gastac provides tested mazda 6 boot strut replacement products with stable lifting force, reliable sealing, and consistent quality for OEM-based replacement and bulk supply.

Mazda 6 Boot Strut Specification

• Model: Mazda 6
• Compatible Makes: Mazda
• Year: For Mazda 6 2004-2008
• OEM Number: sg227008, 8185181a02
• Manufacturer Warranty: 2 Years

OEM	Image	Stroke	Extended Length	Compressed Length	Force
sg227008		9.25 in	22.43 in	13.18 in	119 Lbs
8185181a02		5.98 in	17.80 in	12.32 in	40 Lbs

Which Mazda 6 models does this boot strut fit?

This mazda 6 boot strut replacement fits selected Mazda 6 hatchback models from 2004 to 2008, including Base, GS, GT, S, and i Hatchback 4-Door Hatch versions. Fitment should always be checked by OEM number and vehicle details before purchase.

Fits the following Mazda 6 Years:

What Makes Gastac Mazda 6 Boot Struts Reliable?

• Highest corrosion resistance achieved through powder coated cylinders and special treated piston rod surfaces.
• Minimal friction for the production of lowest extension forces.
• Great life cycles.
• Protection against vibration and light side forces.
• Integrated grease chamber.
• Low break away forces.
• Installation and storage in any position.

How do you install Mazda 6 boot gas struts?

Replacing Mazda 6 Boot Strut is a simple DIY task that usually takes about 10 minutes.

• Step 1: Support the boot lid: Have someone hold the boot lid fully open, or use a secure prop stick to prevent it from falling.
• Step 2: Remove the old strut: Use a flathead screwdriver to gently lift the small retaining clip, then pull the strut off the ball mount. Repeat for both ends.
• Step 3: Install the new strut: Align the new Mazda 6 Boot Strut with the ball mounts and push it into place until the clip snaps securely.
• Step 4: Check the direction: Install the new strut in the same direction as the original one. In most applications, the thicker cylinder end faces upward and the thinner rod end points downward.
• Step 5: Replace both sides: Always replace both boot struts together to keep even pressure and prevent premature wear.

Why Choose Gastac Gas Spring

As a trusted gas spring manufacturer and supplier, Gastac provides reliable gas strut solutions with consistent quality, stable supply, and strong OEM support for global customers. For buyers, choosing a gas spring supplier is not only about price, but also about product durability, batch consistency, delivery reliability, and professional technical support.

• Manufacturer direct supply with stable quality and competitive pricing
• Since 2007, certified with IATF 16949 and ISO 9001:2015
• Bulk and wholesale orders supported with reliable delivery
• OEM-friendly with customizable force, length, stroke, end fittings, and mounting options
• Application support for automotive, furniture, machinery, medical, marine, and industrial uses
• Clear specification confirmation and responsive communication before production
• Two-year after-sales warranty for long-term reliability

FAQ About Mazda 6 Boot Struts

1. How long do struts last on a Mazda 6?

Unfortunately, struts don’t last forever. Over time, they will begin to wear down and lose their effectiveness. For this reason, it is generally recommended that Mazda struts be replaced every 50,000 miles or so, depending on usage, road conditions, and boot lid weight.

2. How much does it cost to replace struts on a Mazda 6?

The replacement cost depends on quantity, OEM number, specifications, and whether standard replacement parts or customized gas struts are required. Gastac offers competitive pricing for mazda 6 boot gas struts, especially for wholesale orders, distributors, and automotive parts suppliers.

3. Can I replace only one Mazda 6 boot strut?

One boot strut can be replaced if only one side is damaged, but replacing both sides is usually recommended. A pair of new Mazda 6 boot struts gives more balanced support and helps the rear hatch open and stay raised more safely.

4. How do I choose the correct Mazda 6 boot strut replacement?

The correct mazda 6 boot strut replacement should be selected by checking the OEM number, vehicle year, hatchback type, extended length, compressed length, stroke, and force. Buyers can also send photos or measurements if the old part number is unclear.

5. Can Gastac provide custom Mazda 6 boot gas struts?

Yes. Gastac can provide standard replacement and custom mazda 6 boot gas struts based on force, length, stroke, end fittings, surface treatment, and order quantity. This helps buyers source suitable gas struts for OEM replacement, wholesale supply, or private-label projects.