Hyundai Sonata Hood Struts

Hyundai Sonata Hood Struts Replacement

Gastac provides reliable Hyundai Sonata hood struts for 2011, 2012, 2013, and 2014 Hyundai Sonata models. These hood lift supports help restore smooth hood opening, stable support, and safer maintenance access.

Our replacement hood struts are compatible with OEM numbers 81161c1000, 811613s000, 817713k001, 811713q000, and 811613q000. If you are looking for 2011 Hyundai Sonata hood struts, 2012 Hyundai Sonata hood struts, 2013 Hyundai Sonata hood struts, or 2014 Hyundai Sonata hood struts, Gastac can help you match the right gas spring by model year or OEM number.

Gastac supplies quality-tested automotive gas struts with competitive pricing, OEM customization support, and a 2-year warranty.

When Should You Replace Hyundai Sonata Hood Struts?

Hyundai Sonata Hood Struts should be replaced when the hood can no longer open smoothly or stay safely raised. Weak struts may make daily inspection, engine maintenance, and repair work unsafe or inconvenient.

Common signs include:

• The hood slowly drops after being opened.
• The hood feels heavy and needs extra support.
• The opening movement becomes slow, weak, or uneven.
• The support force becomes worse in cold weather.
• The strut body shows wear, leakage, or visible damage.

These problems are usually caused by internal gas pressure loss, seal aging, temperature changes, or long-term wear. Replacing weak hood struts helps restore stable support and safer vehicle maintenance.

Hyundai Sonata Hood Struts Specification

• Model: Sonata
• Compatible Makes: Hyundai
• Year: 2011,2012,2013,2014
• OEM Number: 81161c1000,811613s000,817713k001, 811713q000,811613q000
• Manufacturer Warranty: 2 Years

OEM	Image	Stroke	Extended Length	Compressed Length	Force
81161c1000		5.70 in	14.28 in	8.58 in	71 Lbs
811613s000		5.43 in	15.16 in	9.75 in	81 Lbs
817713k001		3.75 in	12.40 in	7.80 in	125 Lbs
811713q000		5.71 in	15.16 in	9.45 in	71 Lbs
811613q000		5.71 in	15.16 in	9.45 in	71 Lbs

Hyundai Sonata Hood Struts Fitment

Fits the following Hyundai Sonata Years:

• 2011 hyundai sonata hood struts
• 2012 hyundai sonata hood struts
• 2013 hyundai sonata hood struts
• 2014 hyundai sonata hood struts
• 2011-2014 | 2.0T Limited Sedan | Excluding Hybrid
• 2011-2014 | 2.0T Sedan | Excluding Hybrid
• 2011-2014 | Base Sedan | Excluding Hybrid
• 2011-2014 | EX Sedan | Excluding Hybrid
• 2011-2014 | GL Sedan | Excluding Hybrid
• 2011-2014 | GLS Sedan | Excluding Hybrid
• 2011-2014 | LX Sedan | Excluding Hybrid
• 2011-2014 | Limited Sedan | Excluding Hybrid
• 2011-2014 | SE Sedan | Excluding Hybrid

Product Features of Hyundai Sonata Hood Struts

• Highest corrosion resistance achieved through powder coated cylinders and special treated piston rod surfaces.
• Minimal friction for the production of lowest extension forces.
• Great life cycles.
• Protection against vibration and light side forces.
• Integrated grease chamber.
• Low break away forces.
• Installation and storage in any position.

Easy To Install

Replacing Hyundai Sonata Hood Struts is a simple DIY task that usually takes about 10 minutes.

• Step 1: Support the hood: Have someone hold the hood fully open, or use a secure prop stick to prevent it from falling.
• Step 2: Remove the old strut: Use a flathead screwdriver to gently lift the small retaining clip, then pull the strut off the ball mount. Repeat for both ends.
• Step 3: Install the new strut: Align the new strut with the ball mounts and push it into place until the clip snaps securely.
• Step 4: Check the direction: Install the new strut in the same direction as the original one. In most applications, the thicker cylinder end faces upward and the thinner rod end points downward.
• Step 5: Replace both sides: Always replace both struts together to keep even pressure and prevent premature wear.

Why Choose Gastac Gas Spring

As a trusted gas spring manufacturer and supplier, Gastac provides reliable gas strut solutions with consistent quality, stable supply, and strong OEM support for global customers. For buyers, choosing a gas spring supplier is not only about price, but also about product durability, batch consistency, delivery reliability, and professional technical support.

• Manufacturer direct supply with stable quality and competitive pricing
• Since 2007, certified with IATF 16949 and ISO 9001:2015
• Bulk and wholesale orders supported with reliable delivery
• OEM-friendly with customizable force, length, stroke, end fittings, and mounting options
• Application support for automotive, furniture, machinery, medical, marine, and industrial uses
• Clear specification confirmation and responsive communication before production
• Two-year after-sales warranty for long-term reliability

FAQ About Hyundai Sonata Hood Struts

Q1: How much does it cost to replace struts on a Hyundai Sonata?

The cost depends on the part number, order quantity, and specific replacement requirements. Gastac offers competitive factory pricing for automotive hood struts, making them suitable for distributors, repair parts suppliers, and wholesale buyers.

Q2: How do I know if my hood struts need replacement?

If the hood drops, opens slowly, feels heavy, or cannot stay fully raised, the hood struts may have lost support force and should be replaced.

Q3: Should I replace both hood struts at the same time?

Yes. Replacing both sides together helps keep the hood support force balanced and improves safety during inspection or maintenance.

Q4: Are hood struts easy to install?

Most hood struts are easy to install with basic tools. Before removal, the hood should be safely supported to prevent it from falling during replacement.

Q5: Can Gastac provide custom hood struts?

Yes. Gastac can provide standard and custom gas spring solutions based on length, stroke, force, end fittings, OEM number, or application requirements.

Need help confirming fitment or OEM replacement? Contact us today, visit our OEM replacement page,
or browse our shop and search by OEM number to find the right replacement.